| |
Types of paper
1. Original Research Papers (Regular
Papers)
2. Review Articles
3. Letters to the Editor
4. Case Reports
5. Book Reviews
6. Forensic Population Genetics
(Original Paper, Short Communication or Letter to the Editor)
7. Rapid Communications
Case Reports will be accepted
only if they contain some important new information for the readers.
Forensic Population Genetics manuscripts can be submitted
using three types of formats:
Forensic Population Genetics - Original paper: In this section full length papers on relevant
population genetics issues of forensic interest will be considered for publication. The data should be original, the population genetic
analysis must be of the highest quality and the data should have forensic relevance beyond the scope of simply reporting allele or haplotype
frequencies.
Forensic Population Genetics - Short communication (former "Announcement of population data"): Understanding
that both the quality of population data and the relevance of results are crucial short communications should be submitted in table format.
Population data are required to be downloaded as supplementary files (see Preparation of supplementary data).
Forensic Population
Genetics - Letter to the editor: If the relevance of the data is not sufficient for an original paper or a short communication,
but still worthy of an announcement, the editors can invite authors to submit a letter to the editor. In this case the manuscript must
be written in the form of a short letter to the editor summarizing the relevant information while the frequency data must be provided
as an electronic supplement, e.g. a spreadsheet table, for online publication in the electronic repository of the journal.
All Forensic
Population Genetics papers should always contain information on the description of the population, ethical requirements and quality control.
For mtDNA DNA papers, previous acceptance of the dataset in EMPOP ( http://www.empop.org) is required, for YSTR and YSNP
data previous inclusion of the data in the YSTR/YSNP database ( http://www.yhrd.org) is required. For specific information
on requirements and procedures of Forensic Population Genetics papers, see the editorial: Publication
of population data for forensic purposes (Forensic Sci. Int. Genet. 4 (2010) 145-147).
Rapid Communications
should describe work of significant interest, whose impact would suffer if publication were not expedited. They should not be longer
than 5 printed journal pages. Authors may suggest that their work is treated as a Rapid Communication, but the final decision on whether
it is suitable as such will be taken by the Editor. Rapid Communications requiring revision should be resubmitted as a new submission.
Contact details for submission
Authors should send queries concerning the submission process or journal
procedures to AuthorSupport@elsevier.com. Authors can check the status of their manuscript within the review procedure
using Elsevier Editorial System.
Page charges
This journal has no page
charges.
Ethics
in Publishing
For information on Ethics in Publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics
and http://www.elsevier.com/ethicalguidelines.
Policy and ethics
The work described in your article must have been carried out in accordance with The Code of Ethics of the World Medical
Association (Declaration of Helsinki) for experiments involving humans http://www.wma.net/e/policy/b3.htm; EC Directive
86/609/EEC for animal experiments http://ec.europa.eu/environment/chemicals/lab_animals/legislation_en.htm; Uniform
Requirements for manuscripts submitted to Biomedical journals http://www.icmje.org. This must be stated at an appropriate
point in the article.
Conflict of interest
All authors must disclose any
financial and personal relationships with other people or organisations that could inappropriately influence (bias) their work. Examples
of potential conflicts of interest include employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/registrations,
and grants or other funding. See also http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except
in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this
and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination
of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing
Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists
of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale
or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to: http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such
involvement then this should be stated. Please see http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit http://www.elsevier.com/languageediting or our customer support site at http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally
online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files
to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are
converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All
correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for
a paper trail.
Submit your article
Please submit your article via
http://www.ees.elsevier.com/fsigen.
Additional information
Please note that articles that are sent to the author for revision need to be returned within four months. A reminder will be sent
in the third month. Any articles that are sent after the fourth month period of revision will be considered a re-submission.
Article structure
Manuscripts
in general should be organized in the following order:
- Title (should be clear, descriptive and not too long)
- Name(s) of
author(s)
- Abstract, which should be clear, descriptive and not longer than 400 words
- Keywords, normally 3-6 items
- Introduction
- Material studied, methods, techniques
- Results
- Discussion
- Conclusion
- Acknowledgments
- References
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly.
Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case
superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each
affiliation, including the country name, and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone
and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
•
Present/permanent address.
If an author has moved since the work described in the article was done, or was visiting at
the time, a "Present address" (or "Permanent address") may be indicated as a footnote to that author's name. The address at which the
author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics"
or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number
the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
•
Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit
each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications
please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation)
document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office
files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on
the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables
below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and
ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Reference style
Text: Indicate
references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s)
must always be given.
Example: "..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ...."
List:
Number the references (numbers in square brackets) in the list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article,
J. Sci. Commun. 163 (2000) 51–59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, third ed.,
Macmillan, New York, 1979.
Reference to a chapter in an edited book:
[3] G.R. Mettam, L.B. Adams, How to prepare an electronic
version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 1999, pp.
281–304.
Video data
Elsevier accepts video material and animation
sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their
article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure or table
by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly
labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly
usable, please provide the files in one of our recommended file formats with a maximum size of 10 MB. Video and animation files supplied
will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com.
Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be
used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video
instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in
the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that
refer to this content.
Supplementary data
Elsevier accepts electronic
supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities
to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will
be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com.
In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors
should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file.
For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior
to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure
that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full
postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure
captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked"
and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference
list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources
(including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge)
and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the
Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please
visit our customer support site at http://support.elsevier.com.
Use of the Digital Object Identifier
The
Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character
string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore,
it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic
information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters
B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed
never to change.
Proofs
One set of page proofs (as PDF files) will be
sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will
be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can
be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from http://www.adobe.com/products/acrobat/readstep2.html.
Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the
Adobe site: http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations
function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your
corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including
replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof
only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the
article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible
to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back
to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed.
Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail.
For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication.
The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer
outlining the terms and conditions of use.
Author orders
When your article
is published, you can commemorate your publication with printed author copies of the journal issue, customized full-color posters, extra
offprints, and more. Please visit https://authororders.elsevier.com
to learn more.
For inquiries relating to the submission
of articles (including electronic submission where available) please visit this journal's homepage. You can track accepted articles at
http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's status has changed. Also
accessible from here is information on copyright, frequently asked questions and more. Contact details for questions arising after acceptance
of an article, especially those relating to proofs, will be provided by the publisher.
|
| |
|
